Brake Fluid Tester - Moisture Content Indicator
PRODUCT DESCRIPTION:
Brake fluid tester with moisture content LED Indicator.
High water content lowers the boiling point & affects braking performance.
Measurement is based on a change in conductivity, to determine the moisture level in the brake fluid.
There are 8 indications on the meter:
1. Green
The green LED lights = water content in the brake fluid - H2O <1.5%, brake fluid qualifies
Battery OK, that is, brake fluid does not contain water
2. Yellow
The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again in six months
Low moisture content, check again in six months
3. Red
The red LED lights = water content in the brake fluid H2O>3%, do not continue to use the brake fluid, it needs to be replaced
The brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but should soon be replaced.
4. Flashing red
Battery on the unit needs to be replaced
5. Green / yellow
Brake fluid has water content of less than 1%, good brake fluid performance, can continue to be used.
6. Green / yellow / yellow:
Brake fluid water content of about 2%, brake fluid can continue to be used.
7. Green / yellow / yellow / red:
Brake fluid water content of about 3%, recommend replacement of brake fluid.
8. Green / yellow / yellow / red / red:
Brake fluid water content of at least 4%, the brake fluid must be replaced immediately, could be dangerous to continue use.
Product Name | Brake Fluid Tester - Moisture Content Indicator |
---|---|
Weight | 0.100000 |
Brand | Habicare |
Manufacturer Part Number (MPN) | 44570231439589 |