Car GPS HUD Speedometer

VJOYCAR C60s Digital GPS Speedometer Car Hud Head Up Display with Speeding Alert Fatigue Alarm, 100% Universal for Vehicle Truck Motorcycle SUV Pick-up Scooter and All

Main Function:
Set/On/Off Over-speed Alarm
Press the Up Button or Down Button to increase or decrease the speed rate B: The default alarm speed rate is 120KM/h
impossible high value which you can't drive means off.

Driving Speed Calibration:
The display speed could be adjusted by hand. Press and hold the up button and Enter button at the same time. It will show the numbers from 650 to 669.
Default speed rate is 665, if you want to increase the display speed with 1KM/H, adjust rate to 666; And if you want to decrease it with 1KM/H, adjust rate to 664.
Set the GPS Speed Unit (KM or Mile):
Long press the Enter button, if you see number 100 shown on the screen, which means KM/h. B: Long press the Enter button, if you see number 161 shown on the screen, which means MPH. The default speed meter unit is set as KM/h.

Fatigue Driving Alarm:
In every hour, system will trigger a fatigue driving alarm with continuous driving time displayed, in order to remind driver to avoid drowsy-driving.
Example: 001 means one-hour continuous driving, 002 means two-hour continuous driving and so on.

:
The digital GPS speedometer need to receive satellite signals to work, so they can't work in the room, inside tunnel, under garage and the place that can't receive satellite signals.
At the first time of using the GPS speedometer, it will take 3-5 minutes to receive the satellite signals.
Sometimes there may be an measurement error of 3-5KM/H, just calibrate it manually.
There is a protective film on the new screen, please remove it, then you will see a very clear display screen.
It's very simple GPS hud, plug and play, however, please contact with us directly if need assistance during usage.

Product Description:
Screen Size-3.0"
Speed Unit -MPH & KM/H
Display Mode-Stand-alone Only


Package Include:
1 GPS HUD Speedometer