Car Jack Kit-Tire Jack Scissor Jack for Car-1.5Ton(4409lbs)

Brand New!
SKU:2230
Description:
Extended Max Height：390mm!!!!!!!!!!!!!!!!!!!!
How to use?

Place under a chassis suitable for lifting.
Turn the handle to raise the jack to the proper height.
Confirm that the jack is in contact with the chassis, continue to move the handle and the car jacked up.
Lift the vehicle off the tire and begin the tire.
When the repair work is complete, crank the handle to land the vehicle smoothly.
Crank the jack to its lowest position, remove and store.
Caution.

(Due to manual measurement, please allow 1-2% error.)

1, check to confirm the load-bearing capacity of the jack and the height of the working stroke, use must not exceed its rated load.

2, before lifting, park the vehicle on a horizontal hard road (maximum slope of not more than 6 °), the vehicle parking.

3、After confirming that the wheels on the diagonal of the removed tires are effectively stuck, loosen the nuts of the wheels to be replaced, but do not unscrew the nuts at this time.

4、Place the jack under the jacking position specified by the car factory, and use the handle to crank the jack to the appropriate height.

5, crank the handle to raise the vehicle to the appropriate height, unscrew the wheel nuts and replace the tire.

6 、After replacing the tire, hand tighten all the fixing nuts of the tire. Do not forcibly lock the fixed nuts of the

7.What if the chassis of the car is too high to reach forward?
You can place a square object or a spare tire under the jack if it is safe, you need to handle it flexibly

Vehicle Service Type ‎Van, Sport Utility Vehicle
Material：Alloy Steel
Load Capacity ：1.5 ton
Extended Max Height：390mm!!!!!!!!!!!!!!!!!!!!

Some SUVs have a high chassis, so be sure to confirm that this height is suitable for your car before purchasing，Calculate according to the height of the car chassis and the thickness of the tires.

Package:
1X Car jack