Digital Caster Camber Gauge Car Truck LCD Strut Magnetic Wheel Alignment Tool

1× Digital Caster Camber Gauge Car Truck LCD Strut Magnetic Wheel Alignment Tool

Features:
1. Precision Wheel Alignment Tool - Magnetic Gauge is a professional tool for positioning the camber and rear camber of your wheels or brake discs to help you accurately check the amount of camber change before reinstallation or return the shock absorber to its lintel position after disassembly and assembly of the suspension. Provides an accurate numerical reference for you to adjust the wheel orientation angle.
2. LED Digital Display and Positioning Bubble - The digital alignment gauge reads the tilt value via LED screen. Compared to the horizontal tube scale of the conventional crash gauge, the change in value is easier to see and can be seen at a glance even in a dark environment. When using the fall gauge, centering the positioning level can help make the test results more accurate.

3. Magnetic Base & Measuring Angle ±90° - The base of the Adjustable Wheel Orientation has a strong magnet, the outer diameter is 45mm, the adsorption area is smaller than the base area of most fall gauges on the market, and the small contact area makes the accuracy more accurate. The measurable angular range ranges from -90° to +90°. Down Arrow indicates an outward tilt, and Up Arrow indicates an inward tilt.
4. "ON 0FF" & "ZERO" button - "ON 0FF" button: Click to power on, press and hold for three seconds to power off. "ZERO" button: Reset button, click to reset the value to 0, adjust the eccentric screw so that the digital wheel alignment shows the expected value. It is suitable for wheel tilt angle positioning and repair of all vehicles and can also be used for replacement measurement of rear tie rods.

Packing List
1X Digital Camber Gauge

Note:
This product does not contain batteries, and the applicable battery type is AAA batteries.