DJI Power 1000 Portable Power Station
DJI Power 1000
Power Your World
Product Highlights
|
Camping and Road Trips |
Content Creation |
DIY |
Home Backup Battery |
|
Mobile Phone Approx. 57 times |
Digital Camera Approx. 59 times |
Electric Jack Hammer Approx. 1.2 hours |
Wi-Fi Router Approx. 76.8 hours |
|
Camping Light Approx. 32 times |
Laptop Approx. 9 times |
Electric Chainsaw Approx. 29 mins |
Refrigerator Approx. 45 hours |
|
Coffee Machine Approx. 55 mins |
Drone Approx. 12 times |
Power Saw Approx. 40 mins |
Lamp Approx. 92 hours |
|
Projector Approx. 9.2 hours |
Photography Lighting Equipment Approx. 1.2 hours |
/ |
Rice Cooker Approx. 1.2 hours |
|
Car Refrigerator Approx. 19 hours |
Speaker Approx. 64 times |
/ |
Juicer Approx. 3.6 hours |
|
Electric Fan Approx. 9 hours |
/ |
/ |
Microwave Oven Approx. 1.3 hours |
|
Mavic 3 Series Intelligent Flight Battery [7] Approx. 32 mins Battery level from 10% to 95% |
DJI Air 3 Intelligent Flight Battery Approx. 30 mins Battery level from 10% to 95% |
|
Inspire 3 TB51 Intelligent Flight Battery Approx. 28 mins Battery level from 10% to 95% |
M30 TB30 Intelligent Flight Battery Approx. 32 mins Battery level from 10% to 95% |
|
Intelligent Battery Management System (BMS) When the safety threshold of electricity usage is surpassed, the protective mechanism for supplying power and recharging will kick into action automatically. And once electricity supply returns to normal, DJI Power 1000 will resume operation. |
|
LFP Cell The LFP cell is safe and durable, and can achieve 4000 cycles, [10] providing a lifespan of approximately 10 years, even with frequent use. [11] |
|
SGS Switzerland Authority Certification Thanks to its comprehensive safety design, DJI Power 1000 has gained the high-quality portable power station certification from SGS Switzerland, and received 26 product test certifications, including 2 product test verifications, 4 mechanical performance tests, 9 electrical performance tests, 3 environmental resistance tests, 5 noise-level tests, and 3 intelligent and efficient DC power-supplying and recharging tests. |
|
11 Temperature Sensors 11 temperature sensors on the device continually monitor heat dissipation, and the power station can function normally even in temperatures as high as 40° C (104° F). [12] |
|
Power Outage Protection Ten fuses located throughout the power station provide circuit protection for each module. Even if there is a circuit abnormality, DJI Power 1000 will respond quickly and safely. |
|
High-Strength Structure The power station uses flame-retardant material and supports weight up to 100 kg (220 lbs), [12] further enhancing reliable protection. |
|
DJI Power Solar Panel Adapter Module (MPPT) Connect to one to three solar panels and recharge DJI Power 1000 with solar power. |
|
DJI Power Car Power Outlet to SDC Power Cable (12V/24V) Can connect to one solar panel to recharge DJI Power 1000 via solar power, or recharge DJI Power 1000 via car charger. |
|
Zignes 120W Solar Panel (Outside North America) Zignes 100W Solar Panel (North America Only) When paired with the DJI-certified Zignes solar panels, DJI Power 1000 can be recharged via solar power using the DJI Power Solar Panel Adapter Module (MPPT). |
|
DJI Power SDC to Matrice 30 Series Fast Charge Cable 230W fast charge, charge a Matrice 30 battery from 10% to 95% in 32 mins. |
|
DJI Power SDC to DJI Air 3 Fast Charge Cable 125W fast charge, charge an Air 3 battery from 10% to 95% in 30 mins. |
|
DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable 150W fast charge, charge a Mavic 3 series battery from 10% to 95% in 32 mins. |
|
DJI Power SDC to DJI Inspire 3 Fast Charge Cable 200W fast charge, charge an Inspire 3 series battery from 10% to 95% in 28 mins. |
|
DJI Power SDC to XT60 Power Cable (12 V) With this cable, DJI Power 1000 can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors. |
|
DJI Power SDC to Car Charger Plug Power Cable (12 V) Using this cable, DJI Power 1000 can charge car-powered devices that have a car charger plug, such as a car refrigerator. |
|
DJI Power 1000 Protective Storage Case Protect the power station from bumps and dust, and make it more convenient to carry. |
- Available when the product's battery level is above 20%.
- Device power does not exceed 2000 W.
- Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only.
- Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.
- Requires certain accessories, which are sold separately.
- DJI Power 1000 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after registration. Consult customer service on DJI Store for more details.
- Supports DJI Mavic 3 Pro Series, Mavic 3 Classic, Mavic 3 Series, and Mavic 3 Enterprise Series.
- DJI Power 1000 can connect to up to two DJI Power Solar Panel Adapter Modules (MPPT), which can then connect up to three solar panels, meaning up to six solar panels can be connected to DJI Power 1000 at the same time. Additionally, DJI Power 1000 can connect to one solar panel through the DJI Power Car Power Outlet to SDC Power Cable.
- Requires the DJI Power Solar Panel Adapter Module (MPPT) and solar panels. The aforementioned accessories are sold separately. The minimum time to fully recharge was measured under 25° C (77° F) laboratory conditions and is for reference only. Actual recharging time is subject to factors like the angle of sunlight and light intensity. Actual user experience may vary. To use solar panels not officially recommended by DJI, convert the solar panel connector to an XT60 interface. To prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of each solar panel is less than 30 V. The power output of each solar panel connected to a single XT60 interface should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
- Measured under 25° C (77° F) laboratory conditions, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.
- Based on the correct usage of the product, DJI Power 1000 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle on a daily basis. This data is for reference only. Actual user experience may vary.
- Data measured in a DJI laboratory.
- Measured 100 cm away from DJI Power 1000 while it was being recharged in the Standard Recharging Mode and is for reference only.
- During power output, the device being charged must support the PD 3.0 protocol. During power input (recharging the power station), the charger must support the PD 3.0 protocol.
DJI Power 1000 Specifications:
| Model | DYM1000L/DYM1000H |
| Capacity | 1024 Wh |
| Net Weight | Approx. 13 kg |
| Dimensions | 448×225×230 mm (L×W×H) |
| Number of Ports | "AC Output × 2<br> USB-C × 2<br> USB-A × 2<br> SDC × 1<br> SDC Lite × 1<br> AC Input × 1" |
| Max Operating Altitude | 3000 m |
| AC Output | "DYM1000L: AC 100-120 V, 50/60 Hz, max continuous output: 2200 W<br> DYM1000H: AC 220-240 V, 50/60 Hz, max continuous output: 2400 W<br><br> <sup>Max continuous output power is available when the product's battery level is above 20%. AC output data varies by country and region. </sup><br> <sup>Given that the voltage in Japan is 100 V, the max continuous output power of the Japanese version is 2000 W.</sup>" |
| AC Output (Bypass Mode) | "DYM1000L: AC 100-120 V, 12 A, 1440 W<br> DYM1000H: AC 220-240 V, 10 A, 2200 W" |
| USB-A Output | "5 V, 3 A<br> 9 V, 2 A<br> 12 V, 2 A<br> Max output power per channel: 24 W" |
| USB–C Output | "5 V, 5 A<br> 9 V, 5 A<br> 12 V, 5 A<br> 15 V, 5 A<br> 20 V, 5 A<br> 28 V, 5 A (EPR)<br> Max output power per channel: 140 W*<br> <sup>* The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.</sup>" |
| SDC and SDC Lite Output | "SDC: 9-27 V, max current: 10 A, max output power: 240 W<br> SDC Lite: 9-27 V, max current: 10 A, max output power: 240 W<br><br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" |
| AC Input | "DYM1000L: AC 100-120 V, 1200 W (recharging), 1440 W (Bypass mode)<br> DYM1000H: AC 220-240 V, 1200 W (recharging), 2200 W (Bypass mode)" |
| SDC and SDC Lite Input | "SDC: DC 32-58.4 V, max 400 W, 8 A<br> SDC Lite: DC 32-58.4 V, max 400 W, 8 A<br> <sup>Both of the SDC and SDC Lite ports support extensive accessories.</sup>" |
| Cell Chemistry | LFP (lithium ferrophosphate) |
| Cycle Life | "Maintains over 70% capacity after 4000 cycles.<br> <sup>Measured at 25℃/77°F room temperature, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.</sup>" |
| Power Supply Temperature | -10° to 45° C (14° to 113° F) |
| Recharging Temperature | 0° to 45° C (32° to 113° F) |
| Storage Temperature | -10° to 45° C (14° to 113° F) |
3
In the Box
DJI Power 1000 × 1
DJI Power AC Power Cable × 1
| Product Name | DJI Power 1000 Portable Power Station |
|---|---|
| Weight | 0.000000 |
| Brand | DJI |
| Manufacturer Part Number (MPN) | 44748058132634 |