DJI Ronin 2 Professional Combo

• Most versatile professional 3-axis stabilization system
• Monocoque carbon fiber frame design
• High torque motors supporting cameras up to 30 lbs
• Fine tune balancing for precision control
• Self-heating hot-swappable batteries
• On-board power for camera and accessories
• Integrated camera controls
• Built-in GPS & compatible with DJI A3 Flight Controller

Availability: Special Order

Product Description

Product Specifications

PRODUCT SPECIFICATIONS

GENERAL

Operation Modes:
Underslung Mode
Upright Mode
Briefcase Mode
Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes:
3-axis
Pan-Lock
Roll-360 (enabled through firmware update)

BUILT-IN FUNCTIONS 

Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring

MECHANICAL AND ELECTRICAL CHARACTERISTICS 

Working Current Static current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time: 8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature: -4°F ~ 122°F (-20°C ~ 50°C)
Weight Including handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal Dimensions Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)

PERIPHERAL 

Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections: 14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input Power Intelligent Battery: 4280 mAh-22.8 V
Connections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software Requirements: Windows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software Requirements: iOS 9 or above; Android 4.4 or above

WORKING PERFORMANCE 

Load Weight: (Reference Value) 30 lbs (13.6 kg)
Angular Vibration Range: ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint Range Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation Range Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°

Warranty

In The Box

IN THE BOX

Ronin 2 Gimbal x 1
Grip x 1 
Remote Controller x 1
TB50 Intelligent Battery x 2
Dual TB50 Battery Mount x 1
Battery Charger x 1
Quad Charging Hub x 1
Battery Charger Power Cable x 1
Ronin 2 Power Hub x 1
Camera Top Cross Bar x 1
Camera Base Plate x 1
Accessory Mount x 1
15mm Rod x 2
15mm Focus Rod Mount x 1
Ronin 2 Universal Mount x 1
Top Mounting Block x 1
Motion Block x 1
Water Tight Protective Case x 1
ARRI Alexa Mini Power Cable x 1
ARRI Alexa Mini Start/Stop Cable x 1
RED Power Cable x 1
RED RCP Control Cable x 1
Ronin 2 Power Cable x 1
2-pin Power Cable x 1
DC Power Cable x 1
Triple P-TAP breakout box x 1
SDI IN Cable x 1
SDI OUT Cable x 1
USB Type-C Data Cable x 1
UART to D-BUS Cable x 1
Hex Tool x 1