DS PB D-Link 30m Cat6 UTP Patch cord (Red color)

D-Link 30m Cat6 UTP Patch cord (Red color)


Features:

D-Link solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). These cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards

As streaming video and multimedia over LAN are gaining popularity, users demand faster data transmission and reduced waiting time. D-Link cables are ideal for simple, cost-effective and high-speed transmission performance. They support a higher signal-to-noise ratio, providing better reliability for current applications and higher data rates for future applications.



Specifications:

GENERAL

Cable:
4 Pairs Unshielded Twisted Pair (UTP)

Conductor Meta: Bare Copper

Color Code: Gray

Conductor: 24 AWG

Insulation Material: HD-PE

Jacket Material: PVC UL94V-0

Heat-resistant: 60C minimum (Temperature limited)

Flame property: The purpose of the vertical flame test is to screen out flammable wires. It follows the VW-1 (UL); FT-1 (CSA) standards.


MODULAR CONNECTOR/PLUG

Color: RJ-45 8P for Transparency

Gold plated: 30U"

Contact blade: Phosphor Bronze

Temperature range: -10 ~ 80C

Dielectric withstanding voltage: 500V AC

Insulation resistance: 35M Ohm (max.)

Durability: 750 matching cycles

Cable-to-plug tensile strength: 20lbs (89N) (min.)

UL applications: 250V AC, 2A (max.)

Material: Polycarbonate (PC) UL94-V-0


Other

APPLICATION

10BASE-T, 100BASE-TX Fast Ethernet, 1000BASE-T (IEEE802.3)
100VG-AnyLAN (IEEE802.12)
550 MHz Broadband Video
Voice, T1, ISDN
155/ 622 Mbps ATM
Power over Ethernet (POE)

APPROVAL / CERTIFICATION

UL 444 (for Copper conductor)
UL 758/ Style 2835
UL 1581 (Test standard)
Verified compliant with TIA/EIA-568C.2 standards by ETL, CUL listed, RoHs