Fuel Pump Vacuum Gauge Pressure Tester Carburetor Valve Pressure Test Kit

Fuel Pump Vacuum Gauge Pressure Tester Carburetor Valve Pressure Test Kit

Carburetor Carb Valve Fuel Pump Pressure Vacuum Tester Gauge Test Tool Kit

Complete fule pump and vacuum gauge tester. Test Fuel Pressure On Mechanical & Electric Fuel Pumps. It will also Diagnose Improper Timing, Burned Or Stuck Valves, Leaking Manifold, Improper Fuel Mixture, Sticking Choke & More. It Includes Rubber Hose & Brass Fittings For Compatibility With Most Cars.


Test fuel pump output pressure to 10PSI.
Read engine cacuum to 28" HG.
Check carburetor settings and calce adjustments.
Come with large 10cm diameter gauge w/ Heavy Rubber Jacket to protect Against Impact and Grease & Grime
58cm long vacuum hose.
Adapters suitable for most vehicles.

Product instructions included.
Case included

Please note: The dial may not point to 0 when you receive the item or after a long time of use. Adjusting the gauge is s a normal operation. Please follow these steps: 1.Remove the rubber coat from the gauge. 2.Use a flat screwdriver to lift the upper half of the gauge.You can lift a little bit from one side and then from opposite direction. 3.After remove the upper half, please use a screwdriver to adjust the screw on the face of the gauge and set the arrow to 0.