Humbrol Enamel Paint - No.61 Flesh Matt (14ml)

A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other surfaces. This includes a wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) 

Coverage: 14ml tin covers approx.0.3m depending on thickness of application 

Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. 

Drying time: Gloss: 1-2 hours. Matt Satin: 20-40 mins touch dry, up to 24 hours for hard dry.

Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. 

Recoat: 6 hours minimum (preferably overnight) 

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 150 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations.

Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. 

Suitable for

Ages 12+