Jumper Leads Heavy Duty Booster Cables

Jumper Cables Heavy Duty Booster Cable 2.5 Metres

Description
Professional tool for commercial or occasional use.

Suitable for all vehicles whether a car or HGV.

The leads will easily start 6 / 12 and 24-volt applications.

3M long which gives tremendous flexibility when batteries are far away from each other.

Industrial rubber grips that are heavily sprung to ensure a tight solid grip on the battery terminal

Heavy gauge serrated teeth will ensure the grip stays on the terminal.

Soft pliable cable makes the leads very easy to handle and will lay flat and run in a straight line.

Low voltage drop.

Listing is for one pair (one red (+) one black ())

Instructions:
1. Wearing protective goggles are highly recommended.
2. Connect one red positive(+)cable end to the positive(+)post of the dead battery.
3. Connect the other positive(+)cable end to the positive(+)post of the good battery.
4. Connect one black negative(-)cable end to the negative(-)post of the good battery.
5. Connect the other negative(-)end to the frame bumper or engine block of the dead battery. (NOT THE NEGATIVE BATTERY POST).
6. Step back from the vehicle being jumped. Start the boosting vehicle first and then engage the starter on the dead vehicle. Do not engage for an extended period of time.
7. Remove the cable ends in the reverse order.

Packages:
1 x Jumper Lead Heavy Duty