Oil Extractor Transfer Pump water Pump 12V 72W

Brand New!
Description

How to use:
No pumping of gasoline!
! The must be preheated by about 30-60 degrees first! Just test the temperature of the with your hand! If it is too low, it will not pump, and if it is too high, the electric pump will be broken (the electric pump can withstand a temperature of 60 degrees)! Then straighten the oil extraction pipe as much as possible and slowly insert it into the dipstick port. Do not insert the pipe hard by feeling. Generally, it will reach the bottom after about 80 cm of insertion! Do not continue to insert it. If you continue to insert it, the pipe will bend inside, and you will not be able to pump oil! Turn on the power again! You can pump it!

:
This oil extractor transfer pump uses 12v mini self-priming pump to exchange car oil. It works by connecting the clamps to the 12V car-battery,and widely used in general industrial equipment, cause this pump can pump oil not only, also can pump hydraulic oil and other liquid. It is an ideal equipment for quick and clean oil-changes.

Specifications:
Rated Voltage: DC 12V
Rated Power: 72W
Maximum Pressure: Max. 1.0MPA
Maximum Flow: 5.5L/min

Cable Length: Approx. 30cm / 11.8"
Length of plastic water pipe:
Inlet pipe length: 100cm
Length of outlet pipe:160CM

Main Color: Black

Package Inculded:
1 x oil pump
1 x outlet pipe
1 x inlet pipe
2 x clips