Underwater Dive Scuba Metal Detector

Designed to help explorers go further than before, This is our most flexible and compact metal detector yet. Its foldable coil Fixture, Scalable handle, and pulse induction system make it the perfect detector for any beach or underwater mission. It's an improved version of a metal dive detector, with a larger 10 x 4-inch coil that guarantees superior performance underwater or above ground.

Its unlike any other pointer on the market. Using the circuit inside the housing.  has an excellent proportional response, selectable beeper and/or vibration alert mode More robust LED light, lanyard loops, longer time battery operation, and waterproof housing making it the best Underwater detector on the market.

Great for both diving and snorkeling 

1 x GP-Hand Held Metal Detector

1 x User Manual
1 x mesh bag
1 x SET screw accessories
1 x Anti-lost bracelet (umbrella rope)

The battery is not included

PLEASE READ CAREFULLY BEFORE DETECTING

• This metal detector is waterproof up to 60M/200FT, it can be immersed in 60M/200FT water for 30 minutes, and the best water depth is within 15 meters for long-time working.

• Before powering on the SHRXY DIVE Pro, make sure the angle between handle and coil is larger than 90 degrees, to avoid coil interference. Please do not turn on the device when the coil is folded

• Please do not pull on the coil cable. The casing of the device where the cable is connected is filled with resin, please do not worry about water leakage. When the cable blocks the connecting shaft, please adjust it to the position.

• Install the anchor ring and attach the lanyard to not lose the detector, especially while detecting under water.

• Make sure the battery cap thread and O rings are free of dust, mud, sediment, etc. Always remember to keep

the end cap thread and O-rings Lubricated with silicone grease to maintain a tight seal.

• Before searching under water or cleaning the detector, make sure that the battery cap is secured tightly, so that no water can get in.

• Always wash your detector in fresh water after each dive. Do not use any chemical cleaners and solvents for

cleaning and/or for any other purpose. Wipe or air the detector dry thoroughly before storing or .

• When storing for a long time, please remove the battery inside the device.

• Do not store the detector under extremely low or high temperature for extended periods. (Storage Temperature: -20 to 60 °C)